| Forum |
| beginner- dnt quite understand doseing |
| richard | Posted @ 07 Mar 2007, 10:10pm |
Member
Posts: 4 | ive heard a fair bit bout doseing but not 100% sure how to do it.i hav a vl turbo with factory t3 turbo. could any1 plz giv me directions chears.
|
 |
| Replies |
| #178 |
| richard | Posted @ 09 Mar 2007, 5:45pm |
Member
Posts: 4 | k. im still havin truble. i dont no wot 2 do wit the air flow meter? do i need 2 get a mafless tune to be able 2 dose? any advice grateful.
|
|
| #185 |
| Steele | Posted @ 10 Mar 2007, 8:53pm |
Member
Posts: 18 | you need, a fair sized intercooler, get the intercooler piping as straight as you can (put the cooler in upside down), BOV (blow off valve) there's a few types out there and they have different volume levels/connections and the like, Turbo timer, better ECU (engine control unit), and that should just about do it, but for better advice go into a place like Supercheap auto or something like that (Rajab or the other one starting with B dont know how to spell it) and ask them but dont say "dose" you'll sound like a f*** tard if you do, use "i want to instal a BOV on my car blah blah blah"
|
|
| #189 |
| Dose pipe | Posted @ 12 Mar 2007, 9:40pm |
Member
Posts: 2 | ^^ stupid n00b
"dosing" isnt the sound of a blow off valve its compressor surge from not having a blow off valve and you dont need any of the crap you said
all you need is:
intercooler with afm in cooler piping
a dose pipe (peice of pipe 25cm long)
|
|
| #191 |
| richard | Posted @ 13 Mar 2007, 8:40pm |
Member
Posts: 4 | i know it had nufin 2 do wit th bov. is it a certain type of afm i need 2 get or can i modify the piping and put the standard afm in?
|
|
| #193 |
| Dose pipe | Posted @ 14 Mar 2007, 3:41am |
Member
Posts: 2 | just chuck the afm in the cooler piping
|
|
| #203 |
| Steele | Posted @ 15 Mar 2007, 7:46pm |
Member
Posts: 18 | but aint the bov what makes the noise?... it's what i was always told... oh man dont i feel dumb 
|
|
