| Forum |
| vl turbo injector heads |
| Joel Robinson | Posted @ 09 Apr 2008, 7:17pm |
Member
Posts: 46 | im looking for some vl turbo injector heads so i can finally attach my turbo i have seen them for sale for about 500 bucks brand new anyone got any they are selling that they wanna sell cheap to me
|
 |
| Replies |
| #1181 |
| makka84 | Posted @ 10 Apr 2008, 5:42pm |
Member
Posts: 198 | The heads are the same on the RB30e and the RB30et,just the cam is different.
The turbo cam is a 252 and the standard one is a 248.
The numbers indicate the duration.
|
|
| #1185 |
| Joel Robinson | Posted @ 11 Apr 2008, 9:02pm |
Member
Posts: 46 | my mate told me to get the injectors (i meant injectors not injector heads sorry) and the turbo ecu and it should be fine he has done this to 2 of his VLs
|
|
| #1186 |
| makka84 | Posted @ 12 Apr 2008, 11:04pm |
Member
Posts: 198 | Yep,thats exactly right.thats all you need is the ECU n injectors.
|
|
| #1187 |
| Joel Robinson | Posted @ 15 Apr 2008, 2:30pm |
Member
Posts: 46 | do you know where i can get the injectors cheap and the ecu cheap
|
|
| #1188 |
| makka84 | Posted @ 15 Apr 2008, 6:36pm |
Member
Posts: 198 | VLT ECU's are getting extremely hard to come by now,but i have 2 of them,if you got a manual then i can help you out but the auto one i need for mine.my manual ECU was reco'd and has proof there but there's somthing you should know about the ECU's;
*3TM is for turbo manual ECU
*3TA is for turbo autoatic ECU
If it does'nt have an ORANGE tag on it,DO NOT BUY IT!
But,i can get you one for your car through automotive solutions for around the $350 mark.these dont have tags as they are reco'd units.
Injectors on standard VLT's are BROWN,you can purchase these for $99 per injector from repco,so $600 for the set.
There's alot on ebay at the moment so you should'nt have too many worries finding both ECU and injectors.
|
|
| #1192 |
| Joel Robinson | Posted @ 15 Apr 2008, 10:03pm |
Member
Posts: 46 | yeah my vl is manual how much you want for the ecu?
all the ecu's are brand new after market ones i was just trying to find a cheaper way to get one. the injectors i dont have trouble finsing them i was just trying to find some cheaper ones used ones or something
|
|
| #1195 |
| makka84 | Posted @ 15 Apr 2008, 11:20pm |
Member
Posts: 198 | $300 for my one,thats chipped with a stage 2 eprom.hauled arse too before i wired in my Microtech.
Look,the standard RB30e injectors will do for now.
Ive done it,but they max out depending on how hard you throttle it and in the odd case ive done some that have exploded under boost as they are not that strong,but will do for everyday driving,its called trial and error.
But if you want the ECU,just let me know coz it aint going anywhere in a hurry unless i put it on ebay.
Last one i put on there on a job i did for a customer,fetched $450.Diehard vl fans will pay the money for'em let me tell ya.
|
|
| #1199 |
| Joel Robinson | Posted @ 17 Apr 2008, 6:22pm |
Member
Posts: 46 | some one was telling me i should get one that is easily re programmable and settings can be changed.
also what are the best injectors to get then i know you say trial and error but what do you recommend mines not for everyday driving. im trying to get the most power out of my RB30
|
|
| #1200 |
| makka84 | Posted @ 18 Apr 2008, 5:21pm |
Member
Posts: 198 | Whoever's telling you to get a programable ECU is probably suggesting an aftermarket ECU like a microtech or other.
But on the other hand,it does'nt hurt to get a piggy computer from microtech.they are programmable via laptop and the piggy normally costs around $900-$1600 depening on the setup you want,they normally control fuel and ignition which in reality on a N/A gives more power,same principal different application.
Injectors,ive normally used anywhere between 380cc and 440cc on standard VLT ECU's and they've gone pretty well.
If you go an aftermarket ECU id go 440cc as a minimum,if you use a VLT ECU then 380cc will do just fine.
Bosch 044 external pump,bosch injectors and a malpassi fuel pressure regulator should be used.
In the end,it all comes down to the tuner!
Small gains for power apart from the obvious headwork,cam,
valves and springs,ect ect.
If you have'nt got a front mounted plenum,get one!
the less piping you use,the less lag will be there by a shitload.you can get one from mortal racing on ebay for 300 bucks,excludes postage.i got one for myself and a customer n they are a good investment.
High flow your turbo if your using a TO3 n 3 inch cat back exhaust system.
|
|
| #1208 |
| Joel Robinson | Posted @ 03 May 2008, 11:14am |
Member
Posts: 46 | umm im interested in your manual ecu can you hold onto it for a few weeks til i get the cash to get it off you. is it tagged or is it a recond either way i dont mind as long as it works and does the job.
also im willing to spend a little extra cash on injectors. what are the best injectors in your mind to get other than stock vlt injectors. im not exactly intending on using it for everyday driving
|
|
| #1212 |
| makka84 | Posted @ 04 May 2008, 3:15pm |
Member
Posts: 198 | Yeah mate ill hold it for ya if you want it,that ECU was setup to run 550cc bosch injectors.
Since ive had the ECU it used to be tagged but it was replaced with a reconditioning tag by the ECU mob that done the mods.
If ya want it tell me when so i can put it on ebay with a buy it now price.
|
|
| #1215 |
| Joel Robinson | Posted @ 07 May 2008, 7:45pm |
Member
Posts: 46 | im struggling to find some decent injectors what are the best injectors to run with this ecu
|
|
| #1216 |
| makka84 | Posted @ 08 May 2008, 5:41pm |
Member
Posts: 198 | Depends on how much you wanna spend.
For this ECU,the Bosch 440cc injectors were perfect.
The 550cc choked it up a little,the 380cc were good for saving on the juice,but i would use 440cc injectors as they were the happy-medium.
Look for some bosch 440cc injectors n you'll be set.
|
|
